Below is a helpful tip from Darlene Quebedeaux, feel free to add your own tips in the comment section.
I was having trouble with a Cricut cartridge yesterday & had to call Customer Service. She told me how to reset my machine & then try it again.
First tip: Always make sure the Cricut is "off" when you put a cartridge in & take it out. Even though the machine comes on when you open it, turn it off, put your cartridge in, then turn the machine back on. Never add or remove a cartridge while the machine is on.
To reset your machine: With no cartridge in & the machine on, turn all the dials from minimum to maximum & back 3 times each. Push the cut button (nothing happens because there's no cartridge in). Then turn the machine off for 10-15 minutes. This should reset your machine. If there are problems after that, call Customer Service.
One more tip I found on their website: Cartridges can be put in the machine frontwards or backwards. If you have problems with your cartridge, you can flip it around. It works both ways.
Saturday, April 21, 2007
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment